How To Install Zebra Blinds – Step-by-Step Guide

It is quite simple to install zebra blinds. Whether you’re installing them inside the window frame for a streamlined, built-in look or outside for more complete light coverage, we’ll take you through the entire process — tools, steps and tricks. A great choice for homeowners, renters, and property managers who want to elevate the look of their windows with the stylish accent of a double-layer treatment.

Zebra roller shades are trending for modern interiors and they come in:

• Cordless/manual or motorized options

• Inside or outside mount styles

• Available in widths from 22'' to 100''

Tools You'll Need for Installation

Start by raiding this arsenal of simple tools:

• Drill or screwdriver

• Measuring tape

• Pencil

• Level

• Metal mounting brackets and screws (which were included)

Optional:

• Wall Anchors (Drywall or Concrete)

• Ladder (for tall window areas)

Step-By-Step-Guide

Step 1: Measure Your Window

✅ Inside Mount (Recessed Look)

• Measure width and height of window frame from the inside edge.

• Record three measurements for width (Top, Middle, Bottom) and height (Left, Center, Right).

• Take your smallest width and height dimension as your final size.

✅ Outside Mount (Wall or Trim Mount)

Calculate the total area to be covered — custom blinds are typically 2–3 inches wider and longer than the window opening to better block light.

Step 2: Mark the Brackets. Hold one of the brackets up to the pallet and mark around the holes

• Position the mounting brackets at your marked location.

• Use a level to ensure that they are straight.

• Pencil in the screw holes.

Step 3: Screw on the Brackets

• Pre-drill pilot holes (especially on wood or drywall).

• Secure the brackets with screws.

• On outside mounts, ensure brackets are high enough to accommodate entire retraction of blind.

⚙️ Step 4: Snap the headrail into position

• Position the headrail of the zebra blind into the brackets.

• Press softly and it will click in or lock.

• The trap operates smoothly, test the trap to check the mechanism.

Step 5: Test and Fine Tune Operation

• If you have a manual window blinds, pull the chain or the wand to shift layers.

• If you have motorized zebra blinds, test the remote or app control.

• Depending on the tightness, you may need to play around with the tension or setting.

Tips for Success

• For large windows (greater than 60"), it helps to have a second person assist in aligning the shade.

• You can always use wall anchors on drywall.

• Always be certain the blinds are level before locking them in.

Can I Mount Motorized Zebra Blinds as Well?

Yes. Electric zebra blinds get installed exactly the same too — just attached to the power source (plug-in, battery pack, or hardwired) and paired to the remote or smart system.

• For battery powered shades, charge it full before the initial installation.

• Pairing guide : For the Somfy, Dooya smart models, follow the pairing operations after installation.

Frequently Asked Questions (FAQ)

Q: Can zebra blinds be fitted without drilling?

A: Yes, a few designs feature no-drill zebra blinds with tension rods or adhesive brackets — great for renters.

Q: What side to mount zebra blinds on?

A: Inside mount provides a cleaner look with less light on the edges; outside mount provides more coverage with the potential for better blackout.

Q: Does it come with installation instructions?

A: Yes, most include printed guides. For a custom order from our factory, we also offer pdf and video instruction.

We make and ship custom zebra blinds 22 to 100 inches wide -- choose between motorized, cordless or manual! Select from light-filtering or blackout fabric, a variety of colors, and smart control options. Great for bedroom, living room, or office windows.