How To Take Horizontal Blinds Off A Window ?

First of all,open the brackets on the ends of the headrail using a screwdriver.

And most horizontal blinds have small, square brackets on the front surface of the headrail. 

The brackets are like small doors that you can pry open with a flathead screwdriver. 

Wedge the head of the screwdriver between the bracket and the headrail, then lift it up. Open the bracket on the opposite end as well.

The headrail usually will not fall out until you start pulling on it. However, keep a hold on it at all times in case it happens to come loose after you open the brackets.

These brackets are very noticeable if your window blinds have them. If you don’t see the square-shaped covers on the front of the headrail, look behind it.

The Mini window blinds have the same kind of bracket as regular horizontal blinds.

2.Pull the headrail toward you to detach the window blinds from the wall. 

Once you have the brackets open, nothing will be holding the headrail in place. Hold onto the headrail with both hands. 

Then, slide it out from the wall to remove it.

Hold the headrail with both hands to balance it as you bring it down toward you. Then, lay it down on the floor.

3.Unscrew the brackets to remove them from the wall. 

The metal mounting brackets will remain on the wall. If you need to remove them, get a power drill fit with a head bit. 

Use it to rotate the screws counterclockwise. Finish by pulling the loosened screws and brackets off of the wall.

You can leave the brackets in place if you plan on putting the blinds back up.