What Will Cause The PC Polycarbonate Sheets Crack Easily?

PC  polycarbonate sheet is a high-strength and durable translucent plastic board.

It is widely used in lighting, partitions, billboards, roofs and other fields

However, during the installation and cutting process of PC endurance boards, if handled improperly, cracks may occur.

Therefore, correct installation and cutting skills are crucial to ensure the quality and service life of these sheets.

1. First of all, before cutting these polycarbonate sheet, the required tools and materials should be planned and prepared in advance.

Cutting tools should be sharp enough and at an appropriate cutting angle to avoid excessive pressure that could cause the edges to crack.

At the same time, the end faces and edges of  PC sheets should be meticulously ground and trimmed to eliminate any potential undulations or sharp angles.

2. Secondly, when installing polycarbonate sheets, pay attention to the reserved expansion and thermal expansion coefficient of the boards.

When the temperature rises, the sheet will deform due to thermal expansion. If you do not consider this and tighten the fasteners too much, it may cause cracks or other damage to the board.

Therefore, it is necessary to leave a certain amount of expansion and contraction space when installing PC sheets to ensure that the boards can expand and contract freely under temperature changes.

3.Finally, personal safety should also be paid attention to when cutting and installing them.

Personal protective equipment such as safety gloves, goggles and masks should be used when cutting and installing polycarbonate sheets to avoid damage to the eyes, respiratory system and hands.

In short, correct installation and cutting skills are important factors in ensuring the quality and lifespan of PC sheets.

Following the correct operating steps and precautions can effectively avoid cracks and other damage to the board and ensure the durability, functionality and beauty of the polycarbonate sheets.